Share this post

May 05, 2015

Introducing Atlantis HyperScale

Hugo Phan - Atlantis Computing

Avatar

What is it?

A hyper-converged appliance running pre-installed USX software on either XenServer or VMware vSphere and on the hardware of your choice – Lenovo, HP, SuperMicro and Cisco.
usx-vs-hyperscale-1.png

How is it installed?

HyperScale comes pre-installed by Atlantis Channel Partners. HyperScale runs exactly the same software as USX, however HyperScale is installed automatically from USB key by the Channel Partner. When it is delivered to your datacenter, it is a simple 5 step process to get the HyperScale appliance ready to use.
Watch the video.

Step 1

install-1.png

Step 2

install-2.png

Step 3

install-3.png

Step 4

install-4.png

Step 5

Done.

What do you get?

The appliance is ready to use in about 30 minutes with three data stores ready for use. You can of course create more volumes and also attach and optimize external storage such as NAS/SAN in addition to the local flash devices that come with the appliance.

Atlantis_SpecSheet_Hyperscale_CX12-24_SuperMicro.png
 

Key Differentiators vs other Hyper-converged Offerings

Apart from lower cost (another post to follow) or you can read this post from Chris Mellor from The Register, HyperScale runs on exactly the same codebase as USX. USX has advanced data services that provide very efficient data reduction and IO acceleration patented technology. For a brief overview of the Data Services please see this video.

hyperscalevsothers.png

Pricing

hyperscalevsothers2.png

Sizing

Number of nodes = 4
SSDs per node = 3
SSD capacity = 400GB
Usable capacity per node = 1200GB
Usable capacity per appliance with FTT=1 = 3,600GB
Effective capacity with 70% de-duplication = 12,000GB

Summary

hyperscale_overview.png
12345
Current rating: 5 (4 ratings)